Aspire Flexus Blok Pod 3ml
The Flexus Blok Pod comes from Aspire. You will receive 1 pod per pack, which can hold up to 3 ml of liquid. The liquid is added to the tank via a side-filling system. It is not necessary to separate the pod from the battery. The right e-cigarette for this is the Flexus Blok with 1200 mAh by Aspi...
Aspire Flexus Q Pod 2ml
The Flexus Q Pod comes with the right pod system for the Flexus Q e-cigarette set. You can fill the pod with up to 2 ml of your desired liquid via bottom filling. Please note that there are no evaporator heads included in the scope of delivery and these must be purchased separately. Suitable evap...
Aspire Flexus Stik Pod 3ml
The Aspire Flexus Stik Pod is the tailor-made pod system for the e-cigarette of the same name. This has a tank size of 3 ml. You fill the pod using a bottom filling system. To do this it is necessary to disconnect the pod from the battery. Matching atomizer heads for the Flexus Stik Pod are the A...
Aspire RIIL X Pod 2ml
The RIIL X Pod comes with the right pod system for the Aspire RIIL X e-cigarette set. You can fill the pod with up to 2 ml of your desired liquid via side-filling. Please note that there are no evaporator heads included in the scope of delivery and these must be purchased separately. Suitable eva...
Aspire Minican Pod with 1.2 Ohm Head (2 pieces per pack)
From Aspire you will receive two Aspire Minican Pods with 1.2 ohms per pack you order. Due to the high resistance, the pods are suitable for moderate vaping from mouth to lungs. The Minican Pod has a tank volume of 3ml which you can fill from below. Inside the permanently installed heads there is...
Aspire Minican Pod with 0.8 Ohm Head (2 pieces per pack)
Use the Aspire Minican Pod system in the Aspire Minican Plus e-cigarette. The tank volume of the pod is 3ml, which is filled via a bottom filling system. A mesh evaporator head is permanently installed in the pod. This means that you should replace the pod at regular intervals. This way you preve...
Aspire - ASE Head (5 pieces per pack)
You can purchase the Aspire ASE atomizer heads with a resistance of 0.18 ohm, 0.3 ohm or 0.35 ohm. Per order you will receive five evaporator heads in the resistance of your choice. The evaporator head with a resistance of 0.18 ohms has a power range of 45 - 60 watts, the evaporator head with a 0...
Aspire Vilter Pro Pod (2 pieces per pack)
The Aspire Vilter Pro Pods are designed for the Vilter Pro e-cigarette. A 1.2 ohm evaporator head has been permanently installed in the pods, which allows you to first collect the resulting vapor in the mouth and then inhale it. When it comes to pods, it is important to note that they are wearing...
Aspire - Proteus Neo Meshed Head 0.17 ohms
The Aspire Proteus Neo Meshed Coil offers a sub-ohmic resistance of 0.17 ohms, allowing you to vape in direct lung draw style. Please note that the evaporator head is a wearing part. If you notice a change in the vapor production or the taste of the liquid, we recommend that you replace the atomi...
Aspire AF Meshed Head (5 pieces per pack)
You will receive five Aspire AF Meshed atomizer heads with a resistance of 0.6 ohm or 1.0 ohm per unit ordered. The coils with 0.6 ohm resistance are designed for sub-ohm vaping, while the coils with 1.0 ohm resistance are designed for moderate vaping. It should be noted that evaporator heads are...
Aspire Vilter 1.0 Ohm Pod (2 per pack)
The Aspire Vilter Pod is the tailor-made pod system for the Vilter e-cigarette from the same company. Since the pod comes with a permanently installed evaporator head with 1.0 ohm, it is necessary to replace the pod at regular intervals. Due to the resistance, Pod is designed for moderate range (...
Aspire BP Head (5 pieces per pack)
The BP evaporator heads from Aspire are suitable for the BP60 e-cigarette set. These are available in resistances of 0.3 ohm and 0.6 ohm. Both evaporator heads are therefore designed for vaping in the sub-Ohm range with direct lung inhalation. With the BP 0.3 Ohm you can vape in a power range of ...
Aspire BP Head (5 pieces per pack)
You will receive five Aspire BP Ohm atomizer heads with a resistance of 0.15 Ohm per order. The evaporator heads are designed for direct lung draws (DL). The evaporator heads can be operated in a power range of 60 - 80 watts. Please note that the evaporator head, which is a wearing part, should b...
Aspire BVC NS Heads 1.8 Ohm (5 per pack)
The Aspire BVC NS 1.8 ohm evaporator heads, also called heads, are the right heads for the Aspire Nautilus AIO e-cigarette set. The heads have a resistance of 1.8 ohms and are therefore designed for cheek vaping (MTL). Scope of delivery: 5x Aspire BVC NS 1.8 ohm heads Important charac...
Aspire Nautilus 2S Mesh Heads 0.7 Ohm (5 per pack)
The Nautilus 2S Mesh Heads from Aspire are suitable for vaping directly on the lungs thanks to their low resistance of 0.7 ohms. Please note that evaporator heads are wearing parts. If you notice changes in the taste or amount of steam, change them yourself. The power range of the evaporator head...
Aspire Nautilus 2S Heads 0.4 Ohm (5 per pack)
The Aspire Nautilus 2S atomizer head with 0.4 ohms is designed for vaping in the sub-ohm range. This means you inhale the vapor directly into your lungs. The power range here is between 23 Watr and 28 Watt. You will receive a total of 5 evaporator heads per pack. The Aspire Nautilus 2S atomizer, ...
Aspire Nautilus Meshed 1.0 Ohm Head (5 per pack)
The Aspire Nautilus Meshed atomizer heads have a resistance of 1.0 ohm and, due to the resistance, are designed for moderate vaping. You will receive five of the Aspire Nautilus Meshed evaporator heads per pack you order. Please note that evaporator heads are wear items and should be replaced at ...
Aspire Nautilus BVC Heads (5 pieces per pack)
The Aspire BVC (Bottom Vertical Coil) Heads are compatible with the Nautilus Mini Clearomizer and the Nautilus 2 Clearomizer, among others. You can also combine these with other Nautilus models. The design of the internal heating unit allows the liquid to flow even at high voltages. You can regul...
Aspire BVC Clearomizer Heads (5 pieces per pack)
The BVC evaporator heads from Aspire are equipped with ceramic watters and have a vertical winding. You can choose between 1.6 ohms or 1.8 ohms. Both evaporator heads are suitable for moderate vaping. You will receive a total of five evaporator heads per pack and variant. Scope of delivery: ...
Aspire Nautilus Meshed Heads 0.3 Ohm (5 per pack)
The Aspire Nautilus Meshed atomizer heads have a resistance of 0.3 ohms and, due to the low resistance, are designed for vaping in the sub-ohm range. You will receive five of the Aspire Nautilus Meshed evaporator heads per pack you order. Please note that evaporator heads are wear items and shoul...
Aspire Nautilus BVC Heads (5 pieces per pack)
The Aspire BVC (Bottom Vertical Coil) Heads are compatible with the Nautilus Mini Clearomizer and the Nautilus 2 Clearomizer, among others. You can also combine these with other Nautilus models. The design of the internal heating unit allows the liquid to flow even at high voltages. You can regu...
Aspire Nautilus BVC Heads (5 pieces per pack)
The Aspire BVC (Bottom Vertical Coil) Heads are compatible with the Nautilus Mini Clearomizer and the Nautilus 2 Clearomizer, among others. You can also combine these with other Nautilus models. The design of the internal heating unit allows the liquid to flow even at high voltages. You can regul...
Aspire - Minican 0.8 Ohm Heads (5 pieces per pack)
The Aspire Minican Head with a resistance of 0.8 ohms is a replaceable coil designed specifically for the Minican 3 and Minican 3 Pro Pod system. When you ordered you received a total of five Aspire Minican 0.8 ohm heads. Scope of delivery: 5x Aspire Minican 0.8 ohm head Important cha...
Aspire - Veynom 510 adapter
The Veynom 510 adapter from Aspire is the ideal accessory for your Veynom EX e-cigarette. This adapter gives you the option of not using the battery of your Veynom EX e-cigarette with the conventional Veynom pod system, but instead with a commercially available clearomizer. Clearomizers that have...
Aspire AGT Airflow Base
The Aspire AGT Airflow Base is available in three different versions with the following diameters: 1.0 mm, 1.2 mm and 1.5 mm. The AGT Airflow Base is compatible with the clearomizer of the same name. Scope of delivery: 1x AGT Airflow Base with 1.0 mm | 1.2mm | 1.5mm
Aspire Vilter replacement filters (10 pieces per pack)
The tailor-made Vilter filters are designed for vaping with the Aspire Vilter e-cigarette. The filters are intended to simulate smoking with a cigarette and thus make it easier to switch to e-cigarettes. Since the filters are not spared from wear and tear, they should be replaced with new ones at...
Share and get 15% off!
Simply share this product on one of the following social networks and you will unlock 15% off!