With the U Cartridge from GeekVape you get the right pod for the GeekVape Sonder U e-cigarette. The evaporator head is permanently installed and has a resistance of 0.7 ohms. The tank volume is 2 ml and is filled via a side-filling system. Since the evaporator head is permanently installed, it is...

For the GeekVape Aegis Boost Pro 2 e-cigarette set, this pod of the same name is the right accessory with which you can vaporize your liquid. The Aegis Boost Pro 2 Pod has a maximum capacity of 4.5 ml. You can fill the pod using a top-filling system without having to remove the pod from the batte...

For the GeekVape Aegis Boost 2 e-cigarette set, this pod of the same name is the right accessory with which you can vaporize your liquid. The Aegis Boost 2 Pod has a maximum capacity of 5 ml. You can fill the pod using a top-filling system without having to remove the pod from the battery. The po...

GeekVape's S cartridges are not only compatible with the GeekVape Wenax S3 e-cigarette, but also with the Wenax Stylus and Wenax SC models. In addition, you can easily combine the GeekVape Wenax M1 filters with the S cartridge. It is important to note that the filters should also be replaced at r...

You will receive 3 of the Wenax H1 cartridge from GeekVape per pack ordered. You can use the cartridge, also called the pod system, for the Wenax H1 e-cigarette of the same name. You can choose between 0.7 ohm and 1.4 ohm resistors. The cartridge is filled via a side-filling system and holds up t...

The GeekVape Q Cartridge is a compatible cartridge for the GeekVape Q series e-cigarettes. The cartridge is equipped with a permanently integrated evaporator head, which is available in 0.8 ohm (MTL, RDL) or 1.2 ohm (MTL) versions. The tank volume of 2 ml offers enough space for your favorite e-l...

The GeekVape Wenax SC cartridge is a suitable replacement item for the e-cigarette set of the same name. You can fill the cartridge with up to 3 ml of your liquid. There is an opening on the side of the cartridge for filling. Suitable evaporator heads are the GeekVape G Series evaporator heads. P...

With the Wenax M1 cartridge you get a pod system that is a perfect fit for the Wenax M1 e-cigarette. The tank volume is 2 ml and is filled via a side-filling system. The Wenax M1 cartridge has a permanently installed evaporator head with a resistance of 0.8 ohms or 1.2 ohms. Due to the resistance...

With the Wenax M1 cartridge with filter you get a cartridge that is a perfect fit for the Wenax M1 e-cigarette. The tank volume is 2 ml and is filled via a side-filling system. The Wenax M1 cartridge has a permanently installed evaporator head with a resistance of 0.8 ohms or 1.2 ohms. Due to the...

You have the choice between 2 cartridges called S30, which come from GeekVape. You can choose between 0.6 ohms and 1.0 ohms. The heads mentioned are permanently installed, which is why it is recommended to replace the cartridges with new ones at regular intervals. Each S30 cartridge holds a maxim...

With the GeekVape B Series evaporator heads you have the choice between two resistors. On the one hand, you can choose the 0.3 ohm evaporator heads, which are suitable for vaping in the sub-ohm range (the vapor is inhaled directly into the lungs), and on the other hand, the 1.2 ohm atomizer heads...

The B Series evaporator heads are, among other things, suitable accessories for the GeekVape Aegis Mini 2 e-cigarette or for the included GeekVape Z Nano 2 evaporator. The atomizer heads come with a resistance of 0.2 ohms. The GeekVape B Series atomizer heads are made of KA1. As with any other at...

The G Series evaporator heads, each with 1.0 ohms, come from GeekVape. These are designed, among other things, for the GeekVape Wenax C1 Pod e-cigarette or for the Aegis Pod Cartridge system or for the Aegis Pod e-cigarette. A total of five evaporator heads are included in each pack. Please repl...

The G Series evaporator heads from GeekVape each have a resistance of 0.8 ohms and are designed for the Wenax C1 Pod e-cigarette. There are 5 evaporator heads per pack, so you can replace them regularly. This prevents any distortion of the taste. Scope of delivery: 5x GeekVape G Series 0....

This G Series atomizer head from GeekVape is a suitable atomizer head for, for example, the GeekVape Wenax Stylus e-cigarette set. With its resistance of 1.2 ohms, the atomizer head can be used for moderate mouth-to-lung vaping. The G Series 1.2 ohm atomizer head can also be used with an output ...

You will receive a total of five of the P Series atomizer heads from GeekVape in the resistance strength you ordered. Each coil has a resistance of 0.15 ohm, 0.2 ohm or 0.4 ohm and can be used for direct lung draws. Please note that evaporator heads are wear items and regular replacement is rec...

These B Series Heads from GeekVape are the right evaporator heads for the Aegis Boost e-cigarette or the pod of the same name. There are two different resistors to choose from. In addition to a head with 0.4 ohms, there is also a head with a resistance of 0.6 ohms. Both evaporator heads are made...

With every pack you order you will receive five GeekVape Z Series XM Heads. You can choose between two different resistance levels: 0.15 ohm and 0.4 ohm. The 0.15 ohm version is ideal for the power range of 70 to 85 watts, while the 0.4 ohm version works in the range of 50 to 60 watts. These resi...

Each pack contains a total of five Z Series evaporator heads, each with 0.4 ohms. The Geekvape atomizer heads can be operated between 50 watts and 60 watts. As soon as you notice a change in taste and a decrease in vapor production, replace the atomizer head with a new one. The G Mesh Z1 atomize...

You will receive a total of five of the M Series atomizer heads from GeekVape in the resistance level you ordered. Each coil has a resistance of 0.14 ohm, 0.3 ohm, 0.2 ohm or 0.15 ohm and can be used for direct lung draws. Please note that the evaporator heads are wear items and regular replacem...

The GeekVape Z Series atomizer heads come in a pack of five. This means that you will find a total of 5 evaporator heads per pack. The evaporator head has a resistance of 0.15 ohms and can therefore be operated in the sub-ohm range. In addition, the power range is between 80 watts and 90 watts. A...

The Z Series 0.25 ohm atomizer heads come from GeekVape. Please note that the evaporator heads are wearing parts, so you should replace them regularly. Since the resistance of 0.25 ohms is in the sub-ohm range, you inhale the resulting vapor directly into your lungs. scope of delivery 5x Geek...

The GeekVape Z Nano 2 atomizer can hold a maximum of 3.5 ml of liquid, which is added to the tank via the top filling system. All you have to do is unscrew the top cap including the mouthpiece. A replacement glass tank with 2 ml is included in the scope of delivery. In addition to the tank, you w...

The GeekVape Z Fli Clearomizer has a filling volume of 5.5 ml and is equipped with a top filling system (flip top cap), which allows you to easily refill your liquid from above. Included in delivery are the GeekVape Z-Series XM Heads with a resistance of 0.15 ohm and 0.4 ohm. Thanks to their low ...

The GeekVape Z Subohm atomizer can hold a maximum of 5ml liquid, which is added to the tank via the top filling system. All you have to do is unscrew the top cap including the mouthpiece. A replacement glass tank with 3.5ml is included. Next to the tank you will find two mesh atomizer heads that ...

With the Z Nano 2 glass tank you receive a precisely fitting replacement glass tank for the Z Nano 2 evaporator of the same name. The capacity of the tank is 3.5 ml. Scope of delivery: 1x GeekVape Z Nano 2 glass tank 3.5 ml Important characteristics: Tank volume: 3.5 ml transpar...

These Wenax M1 filters are designed for vaping with the GeekVape Wenax M1 e-cigarette. The filters are intended to make it easier to switch from a conventional cigarette to an e-cigarette. Since the filters are not spared from wear and tear, they should be replaced with new ones at regular interv...

You can use this glass tank for the GeekVape Z Sub-Ohm vaporizer. The glass tank is also designed for use with other GeekVape models (ZX RTA, ZX II RTA, and Z DUAL RTA). You can purchase the glass tank with a tank volume of 3.5 ml or 5 ml. For each pack you order, you will receive one glass tank ...

You can purchase the Z Max Bubble glass tank with a capacity of 4ml. It is a suitable accessory for the GeekVape Z Max Subohm evaporator. The glass tank is made from the stable and heat-resistant material Pyrex. The glass tank is replaced without the use of tools. Scope of delivery: 1x Gee...

Scope of delivery: 1x Z Subohm mouthpiece Compatible with: GeekVape Z Subohm Clearomizer