Luxe Q Mesh replacement pods 2ml filling volume from Vaporesso Wholesale Retail price €10.95 With the Vaporesso Luxe Q Mesh Pods you can choose from four different resistances: 0.6 ohm, 0.8 ohm, 1.0 ohm and 1.2 ohm. The Luxe Q Mesh Pods are equipped with permanently installe...

The Luxe Q Mesh Pod systems come from the renowned brand Vaporesso. They offer you the choice between four variants with a tank volume of 2ml: 0.6 ohm, 0.8 ohm, 1.0 ohm and 1.2 ohm and with 3ml three variants: 0.6 ohm, 0.8 ohm and 1 .0 ohms. You will receive four pods per pack and variant ordered...

The Luxe Q Mesh Pod systems come from the renowned brand Vaporesso. They offer you the choice between four variants with a tank volume of 2ml: 0.6 ohm, 0.8 ohm, 1.0 ohm and 1.2 ohm and with 3ml three variants: 0.6 ohm, 0.8 ohm and 1 .0 ohms. You will receive four pods per pack and variant ordered...

With the Vaporesso LUXE X Pods you have the right pods for the LUXE X e-cigarette set from the same company. Up to 5 ml of liquid enters the pod tank via a bottom filling system. You can choose between three resistors. The LUXE If you first collect the steam in your mouth and then inhale it, i.e....

In one pack you will find 2 VECO GO Pods from Vaporesso in your desired resistance, either 0.6 ohm or 0.8 ohm. Both resistances have been specially developed for cheek steaming. The VECO GO Pods are designed as a suitable accessory for the e-cigarette of the same name. Since the heads are firmly ...

With the Vaporesso GTX Pod 26 you get a suitable accessory for the GTX GO 80 e-cigarette. This pod is characterized by its tank volume of 5ml and its diameter of 26mm. You fill your liquid into the pod using a top filling, whereby only the top cap needs to be removed. You can use the pod with the...

The ECO Nano Pod systems come from the Vaporesso brand and offer you two variants to choose from: 0.8 ohm and 1.2 ohm. The evaporator heads are permanently installed in the ECO Nano Pods, which is why it is recommended to replace the entire pod system after a certain period of time. These evapora...

You will receive two Vaporesso GTX Pod 22 per pack. The pod system is suitable for the Vaporesso GTX GO 40 e-cigarette and can hold up to 3.5ml of liquid. You add the liquid into the tank from above, i.e. via the top system. The tank is transparent so you can read the liquid level and refill the ...

The Vaporesso LUXE XR Pods are a suitable pod system for the Vaporessoe LUXE X e-cigarette set and the LUXE XR MAX e-cigarette set. With the LUXE XR Pod system you can choose between an MTL, RDL and a DTL variant. All three pod systems are compatible with the Vaporesso GTX 0.2 ohm (DTL), 0.4 ohm ...

The iTank 2 Clearomizer from Vaporesso has a tank volume of 8 ml. You can fill the tank from above using a top-filling system. To do this, push the top cap to the side to access the opening for filling. You will receive two heads in the scope of delivery that are designed for vaping in the sub-Oh...

Use the generous Vaporesso iTank 2 glass tank with a capacity of 8 ml, specially designed for the iTank 2 vaporizer. Made of transparent material, the tank provides clear insights into the current liquid level. Replacing the tank without tools is straightforward. Simply clean the glass tank with ...

The GT CCELL manufactured by Vaporesso have a resistance of 0.5 ohms and are suitable for direct lung draws. With the GT CCELL evaporator heads you can vape in a power range of 20 to 40 watts. One pack includes 3x GT CCELL evaporator heads. Important characteristics: Resistance: 0.5 ohms ...

The GT Mesh atomizer heads from Vaporesso have a resistance of 0.18 ohms and can be operated in a power range of 50 to 85. One pack comes with three GT Mesh evaporator heads Important characteristics: Resistance: 0.18 ohms Windings: 1 Power range: 50 - 85 watts Suitable for lung pulls ...

You can purchase the GTI atomizer heads with a resistance of 0.2 ohm, 0.4 ohm or 0.15 ohm. Per order you will receive five evaporator heads with the resistance of your choice. Regardless of the resistance, direct lung pulls (DL) can be made with the evaporator heads. The 0.2 ohm atomizer heads ca...

You can purchase the GTX Mesh atomizer heads with a resistance of 0.2, 0.3, 0.6 or 0.8 ohms. Per order you will receive five evaporator heads with the resistance of your choice. Regardless of the resistance, direct lung pulls (DL) can be made with the evaporator heads. The atomizer head with a re...

If you need a new glass tank for your Sky Solo Plus e-cigarette set, this 8 ml glass tank is the right replacement item. The glass tank, made of transparent Pyrex glass, can be replaced if necessary and comes in two versions. Scope of delivery: 1x Vaporesso Sky Solo Plus glass tank 8 ml ...