Innokin - Endura Apex e-cigarette

Innokin Edura Apex E-Cigarette Wholesale B2B

From Innokin you get the Endura Apex e-cigarette set. The set consists of the battery of the same name and a Prism Apex atomizer. The battery has a battery capacity of 1800 mAh and can be recharged using the included USB-C charging cable. The atomizer comes with two Prism S Heads. One head has a resistance of 0.9 ohms and the other 0.8 ohms. Both are therefore designed for moderate cheek steaming. The set supports atomizer heads with a resistance range between 0.8 ohms and 3.5 ohms. Please note that the heads are among the wearing parts of an e-cigarette. Therefore, they should be replaced with a new one at regular intervals. In this way you can counteract negative taste and/or vapor development. The Endura Apex also has a fire button, which you can use to switch the device on or off and evaporate the liquid. There is also a regulator at the bottom of the battery that allows you to adjust two power levels by rotating movements. You can choose between higher power (3.85V / 16.5W) or lower power (3.6V / 14.5W). An LED was placed above the controller, which lights up red at higher power and green at lower power. The Innokin Prism Apex has a tank volume of 3 ml and can be refilled again and again using a top-filling system. The airflow is integrated at the bottom of the base, which can be individually controlled.

scope of delivery

• 1x Endura Apex battery
• 1x Prism Apex Clearomizer
• 1x Prism S 0.9 Ohm Head | MTL
• 1x Prism S 0.8 Ohm Head | MTL
• 1x spare parts set
• 1x USB-C cable
• 1x user manual

Endura Apex battery

• Battery capacity: 1800mAh
• Output mode: Constant Voltage
• Output voltage: 3.47 volts
• LED indicator
• Dimensions: 22mm x 134.2mm
• USB-C port

Prism Apex Clearomizer

• Bottom airflow
• Tank volume: 3 ml
• Top filling system
• Dimensions: 22mm x 55.5mm